As of March 31, 2006, Zebra no longer offers firmware with ZBI v1.0-v1.5. After this date, Zebra will no longer make, distribute, or support firmware with ZBI v1.0-v1.5 on any new products. Updated firmware, without ZBI v1.0-v1.5 and ready for use, is available for download. The general functionality and version numbers of the updated firmware are unchanged.
Please note the following:
High Performance, Industrial & Commercial, RFID Printers/Encoders & Print Engines made after March 31, 2006 (listed below):
When firmware released prior to March 31, 2006 is sent to the printer, the unit will remain in download mode until the appropriate updated firmware is sent to the unit. The affected printers made after March 31, 2006 can be identified in the following way: |
|
 |
| Printer Models |
Serial Numbers Above |
Hardware Id shown on Printer Configuration Label |
| 110XiIIIPlus 203/300/600 dpi |
91C06150075 |
V34 |
| 140XiIIIPlus 203 dpi |
8592452 |
V34 |
| 170XiIIIPlus 203/300 dpi |
7078373 |
V34 |
| 220XiIIIPlus 203/300 dpi |
2058243 |
V34 |
| |
|
|
| Z4Mplus & Z6Mplus 203/300 dpi |
02C06150517 |
V34 |
| 105SL 203/300 dpi |
6512869 |
V34 |
| |
|
|
| 110PAX4 203/300 dpi |
04C06150014 |
V34 |
| 170PAX4 203/300 dpi |
05C06150012 |
V34 |
| |
|
|
| R110PAX4 203/300 dpi |
04C06150014 |
V34 |
| R110Xi™ 203/300 dpi |
91C06150075 |
V34 |
| R170Xi 203/300 dpi |
7078373 |
V34 |
| R4Mplus 203 dpi |
02C06150517 |
V34 |
|
 |
S600 units made after March 31st, 2006 (listed below):
When firmware released prior to March 31, 2006 is sent to the printer, the unit will go into the "download error" mode. If the unit is power cycled, the printer will return to using the existing firmware on the unit. S600 units made after March 31, 2006 can be identified in the following way: |
|
|
| Printer Model |
Serial Numbers Above |
Hardware Id shown on Printer Configuration Label |
| S600 |
5388121 |
V2.2.4 |
|
|
| Identifying Main Logic Boards made after March 31, 2006: Main logic board kits made after March 31, 2006 can be identified by examining the date code found on the box label. Kits made after March 31, 2006 are marked with a date code of 033006XX or later. |
|
Desktop units made after March 31, 2006 (listed below):
When firmware released prior to March 31, 2006 is sent to the printer, the unit will reset and return to using the existing firmware on the unit. The affected Desktop units made after March 31, 2006 can be identified in the following way: |
|
|
| Printer Models |
Serial Numbers Above |
Hardware Id shown on Printer Configuration Label |
| LP 2824-Z |
24A061300370 |
V20 |
| TLP 2824-Z |
23A061400004 |
V20 |
| LP 2844-Z |
46A061400946 |
V20 |
| TLP 2844-Z |
45A061400024 |
V20 |
| TLP 3844-Z |
49A061400716 |
V20 |
| R2824-Z |
75A061200034 |
V20 |
|
|
For further support information, contact:
North America or Latin America
Toll-free: +1 866 515 2485
Phone: +1 847 793 5585
Asia Pacific
Phone: +65 6858 0722
Fax: +65 6885 0838
Europe, Asia, Middle East, India, Pakistan, or Sri Lanka
Contact your supplier |
|
| | |
