RFID Transponder Guidelines
Zebra supports the following transponders with our line of printer/encoders. When used as specified, these transponders are certified to print and encode with the associated Zebra RFID printer/encoder listed. Users will need to review and accept the terms of Zebra's disclaimer before downloading guideline information. Please note, the R110Xi4 printer/encoder does not require transponder placement/guidelines, so we do not publish them here. All transponders for this printer are configured by running the RF Calibrate function.
Placement/Power Guidelines are subject to change as a result of modifications to the inlay design and/or additional testing. Please check this page frequently for updated guidelines. If a specific inlay is desired that is not shown in the lists below, please contact the Zebra RFID team at email@example.com.
UHF frequency and power regulations vary depending upon country and regulatory environment. The "-Rx" in the document title indicates the specific regulatory configuration. Please check the printer configuration number to determine which document applies. Generally, -R0 applies to printers for US/Canada/Mexico, while –R1 applies to printers for Europe.
Note: The R110Xi4 is not listed here, as it does not require transponder placement/power guidelines. Simply run the RF Calibrate function to configure for your RFID labels.