Ajustando a posição de corte para impressoras ZPL ao usar o software ZebraDesigner

Ajustando a posição de corte para impressoras ZPL ao usar o software ZebraDesigner

Article ID: 45125479



Topic or Information

This solution is for the unusual occurrence where the ZebraDesigner driver for a ZPL printer is set to "Cut" and the actual cutting is not made at the correct location between labels

Applies To

ZebraDesigner Software being used with a printer using a cutter


To adjust the cut position set the "Tear Off" adjustment parameter in the driver Properties.

  • Open the ZebraDesigner driver Properties and go to the "Advanced Setup" tab.
  • Check the "Tear off" Operation mode.
  • Change the value in the "Tear Off Adjustment" field to change the cut position. A positive value will move it towards the unprinted label, a negative value will move it towards the just printed label.
  • Click "OK"
  • Check the "Cutter" Operation mode.
  • The "Tear Off Adjustment" will still be applied even though the entry position is grayed out on the display.

Additional Information

Configuring Driver Settings  Read More>>

+ Product Codes

  • 105SLPlus impressoras industriais
  • 105SLPlus impressoras industriais
  • 110Xi4 impressora industrial
  • 140Xi4 impressora industrial
  • 170Xi4 impressora industrial
  • 220Xi4 impressora industrial
  • Solução de etiqueta RFID surface
  • Impressoras de mesa G-Series GX
  • GX420Rx impressora desktop
  • GX420d impressora desktop
  • GX420t impressora desktop
  • GX430d impressora desktop
  • GX430t impressora desktop
  • Impressoras industriais
  • Xi Series Industrial Printers
  • ZD420-HC
  • ZD500 impressora desktop
  • ZD500 impressora desktop
  • ZD500R impressoras RFID
  • ZD500R impressoras RFID
  • ZM400
  • ZM600
  • Impressoras industriais da série ZT200
  • ZT210 impressora industrial
  • ZT220 impressora industrial
  • ZT230 impressora industrial
  • Impressoras industriais da série ZT400
  • Impressoras RFID série ZT400
  • ZT410 impressora industrial
  • ZT410 RFID impressora industrial
  • ZT420 impressora industrial
  • ZT420 RFID impressora industrial
  • ZebraDesigner
  • ZebraDesigner