Velocity | When to use the Ivanti Scan Driver and when to use DataWedge as the Scan Driver | Zebra

Velocity - When to use the Ivanti Scan Driver and when to use DataWedge as the Scan Driver

文章编号:32240898

Issue / Question

Velocity will be used on the Zebra Android Mobile Device. Should the integrated Ivanti Scan Driver be used, or should DataWedge be used?

Applicable To

Zebra, Android, Devices, Ivanti, Wavelink, Mobile Devices, Scanner, Velocity

Resolution / Answer

When configuring the Velocity Console Project, you will want to decide what Scan Driver the intended Mobile Devices should use.
As a general rule, Mobile Devices with an integrated scanner will use the Ivanti Scan Driver. 

This can be configured by doing the following:

Start the Velocity Console and select the Host tab on the top row:



Select Scanner on the left side.
By default, when creating a new Project, the Scanner Profiles window is blank.  This means that Ivanti is not pre-loading their Scan Driver in the Velocity Project.
To load the Ivanti Scan Driver, you will need to select New.
Select the down arrow to show the available list.



Select Zebra as your Vendor
Then select OK

You will then be presented with all the tabs and options that can be configured through Velocity to control the scanner characteristics:



Symbologies can be Enabled/Disabled, and specific symbology parameters can be set for each Enabled symbology.

*** Another important reason to use the Ivanti Scan Driver ***
If the Velocity Project contains any Scripts that involve the scanner, the Ivanti Scan Driver will be required.  

If the Velocity Project is intended to be used on a device that requires an external scanner, then the DataWedge Scan Driver should be used.  
Ivanti cannot control the configuration of external scanners.
In this case, the Scanner Profile window needs to remain empty, like this:



When empty, the DataWedge Profile0 (default) is used.
Velocity Scripts that use involve scanning cannot be used when the DataWedge Scan Driver is used.
 

+ Applicable Products

  • 7530 G2 移动数据终端
  • 8515 车载数据终端
  • 8525 G2 车载数据终端
  • 8530 G2 车载数据终端
  • 8585 8595 Vehicle-mounted Computer
  • DataWedge
  • DataWedge
  • EC30
  • EP10 移动数据终端
  • ES400 企业级智能手机
  • ET50
  • ET51
  • ET55
  • ET56
  • EWP2000 Mobile Computer- Voice over WLAN
  • IKON 设备
  • M60
  • MC1000 移动数据终端
  • MC17
  • MC18
  • MC1x Personal Shopper Series
  • MC2100 移动数据终端
  • MC3090 移动数据终端
  • MC3100 移动数据终端
  • MC3190-Z RFID 读取器
  • MC3200 移动数据终端
  • MC3300
  • MC3300R 系列
  • MC3330R
  • MC3390R
  • MC36 移动数据终端
  • MC40
  • MC40 移动数据终端系列
  • MC40-HC
  • MC45 移动数据终端
  • MC45 NCF
  • MC55 移动数据终端
  • MC55 移动数据终端系列
  • MC55A0
  • MC55A0-HC
  • MC55N0
  • MC55X
  • MC55X-HC
  • MC65 移动数据终端
  • MC67
  • MC67 基本版
  • MC67 双 WAN 版
  • MC67 移动数据终端系列
  • MC67 NA 移动数据终端
  • MC67NA 基本模型移动数据终端
  • MC67ND 移动数据终端
  • MC70 移动数据终端
  • MC75 3.5G 全球企业数字助理 (EDA)
  • MC75A HF RFID 读取器
  • MC75A 移动数据终端
  • 适用于医疗保健业的 MC75A0-HC 移动数据终端
  • MC9090 CE 移动数据终端
  • MC9090 WM 移动数据终端
  • MC9090-G RFID 读取器
  • MC9090-Z RFID 读取器
  • MC9097 手持式移动数据终端
  • MC9190-G 移动数据终端
  • MC9190-Z RFID 读取器
  • MC9200 移动数据终端
  • MC9300 移动数据终端
  • MC9500-K 移动数据终端
  • ML900 Mobile Computer
  • ML910 Mobile Computer
  • NEO 设备
  • Omnii RT15 移动数据终端
  • Omnii XT10
  • Omnii XT15
  • Omnii XT15 移动数据终端系列
  • Omnii XT15f
  • Omnii XT15ni
  • PS20
  • RFD2000 RFID 背夹
  • RFD5500 RFID读取器
  • RFD8500 RFID读取器
  • RFD8500i UHF RFID 背夹
  • RS309-HP2000FLR
  • RS309-HP2000FSR
  • RS309-HP2000ZSR
  • RS409-SR2000ZLR
  • RS409-SR2000ZZR
  • SB1
  • SB1 智能识别证系列
  • TC20
  • TC25
  • TC51
  • TC51-HC 移动数据终端
  • TC52 触摸式数据终端
  • TC52-HC
  • TC55 触摸式数据终端
  • TC56
  • TC57 触摸式数据终端
  • TC70
  • TC70x
  • TC72 触摸式数据终端
  • TC75
  • TC75x
  • TC77 触摸式数据终端
  • TC8000
  • TC8300
  • VC5090 车载数据终端
  • VC6000 车载数据终端
  • VC6090 车载数据终端
  • VC6096 WWAN 车载数据终端
  • VC70 车载数据终端
  • VC70N0
  • VH10 车载数据终端
  • VRC3910 Mobile Computer
  • 车载
  • WT6000 佩戴式终端
  • Workabout Pro 3
  • Workabout Pro 4 移动数据终端