MC9100 Operating System BSP 03.37.02 - Hot Fix CFE 01.03.00 Release Notes
Introduction
HotFix CFE (Cumulative Fixes from Engineering) Package includes multiple SPR Hotfixes contained into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision.
HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy.
Description
The content and related Hot fixes that are included in this HotFix CFE_MC91_CE_033702_EN_v010300_e.cab is as follows.
SPR NO |
Synopsis |
27855 | Battery Health Service & UI Application |
26414 |
Scanner Decoding performance Improvement for Imager based devices |
26579 |
Shift Key is not working properly |
Note: SPR 27855 Battery Health Application - This is a new feature to turn on Battery Health service and UI on Zebra terminals with Smart batteries. Customer can install the fix by tapping the shortcut \Program Files\BatteryHealth.lnk . When the fix is installed a mandatory warm boot is required. To warm boot MC9190, hold the power key for 5 sec.
This HotFix CFE package CFE_MC91_CE_033702_EN_v010300_e.cab obsoletes the following HotFix CFEs:
HotFix CFE version | Product |
CFE_MC91_CE_033702_EN_v010200_e.cab | MC9190 |
CFE_MC91_CE_033702_EN_v010100_e.cab |
MC9190 |
Note: Latest CFE package includes previous CFE package hot fixes and new SPR hotfix.
Package Details
CFE_MC91_CE_033702_EN_v010300_e.cab (CFE package without Warm boot)
Device Compatibility
This HotFix CFE Package software release has been approved for use with the following Zebra devices.
Device |
Operating System |
BSP Version |
MC9190 | CE 6.0 | v03.37.02 |
Installation Requirements
The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.
- Windows Mobile Device Center (For Windows Desktops)
- SD Cards / Micro SD cards
- MDM set up
Installation Instructions
For Normal installation of the PATCH:
- Windows Mobile Device Center (For Windows Desktops) Installation Instructions:
- Copy "CFE_MC91_CE_033702_EN_v010300_e.cab" file to the Application folder on the device.
- Deploy the solution by tapping on the "CFE_MC91_CE_033702_EN_v010300_e.cab" file.
- Change will take effect after manual reboot of the terminal is done.
- SD Cards / Micro SD cards Installation Instructions:
- Copy "CFE_MC91_CE_033702_EN_v010300_e.cab" file to the SD card.
- Deploy the solution by tapping on the "CFE_MC91_CE_033702_EN_v010300_e.cab"
- Change will take effect after manual reboot of the terminal is done.
For MSP or REMOTE installation of the PATCH:
- Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC91_CE_033702_EN_v010300_e.cab" file to the application folder of the device.
- Deploy the solution by tapping on the "CFE_MC91_CE_033702_EN_v010300_e.cab" file.
- Change will take effect after manual reboot of the terminal is done.
Release Date
June, 2015