MC75A Operating System BSP 04.47.04 - HotFix CFE 01.02.00 Release Notes
Introduction
HotFix CFE (Cumulative Fixes from Engineering) Package includes multiple SPR Hotfixes contained into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision.
HotFix CFE packages are validated only by engineering validation team and the package follows ZebraTechnologies HotFix Package Policy.
Description
The content and related Hotfix included in this HotFix CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab/CFE_MC75A_A6_WM_044704_EN_v010200_e_NB.cab is as follows.
SPR NO |
Synopsis |
26108 |
MO Voice Call Mute Issue. During the initial stage of the call connection where the calling party doesn’t hear the caller sound after lifting the call. |
28401 |
Device will not reconnect to AP after resume. |
Note: For SPR 28401
This is a SDIO patch and needs to be installed with Latest Fusion(37R or onwards).
Prior to installation, ensure that you are currently running an approved version of the Operating System from the table above. Otherwise, visit https://portal.motorolasolutions.com/Support/US-EN and load the correct DCP for your product. This installation contains DHCP.dll which includes DHCP client having fixes for few SPRs. This is required if this cab is installed on any older OEM version.
This HotFix CFE package CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab/CFE_MC75A_A6_WM_044704_EN_v010200_e_NB.cab obsoletes the following HotFix CFEs:
HotFix CFE version | Product |
CFE_MC75A_WM_A6_044704_EN_v010100_E.cab | MC75A6 |
Note: Latest CFE package includes previous CFE package hot fixes and new SPR hotfix.
Package Details
CFE_MC75A_A6_WM_044704_EN_v010200_e_NB.cab (CFE package without Warm boot)
CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab (CFE package with Warm boot)
Device Compatibility
This HotFix CFE Package software release has been approved for use with the following Zebra devices.
Device |
Operating System |
BSP Version |
MC75A6 | WM6.5 | v4.47.04 |
Installation Requirements
The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.
- Windows Mobile Device Center (For Windows Desktops)
- SD Cards / Micro SD cards
- MDM set up
Installation Instructions
- Windows Mobile Device Center (For Windows Desktops) Installation Instructions:
1. Copy "CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab" file to the Application folder on the device.
2. Deploy the solution by tapping on the "CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab" file.
3. After successful deployment of the "CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab" file, device will do an automatic warm boot.
- SD Cards / Micro SD cards Installation Instructions:
1. Copy "CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab" file to the SD card.
2. Deploy the solution by tapping on the "CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab"
3. After successful deployment of the "CFE_MC75A_A6_WM_044704_EN_v010200_e_WB.cab" file, device will do an automatic warm boot.
For MSP or REMOTE installation of the PATCH:
1. Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC75A_A6_WM_044704_EN_v010200_e_NB.cab" file to the application folder of the device.
2. To deploy the solution, setup in MDM to install the cab file "CFE_MC75A_A6_WM_044704_EN_v010200_e_NB.cab" file.
3. Changes will take effect after a manual reboot of the terminal or if MDM reboots device.
Release Date
January, 2015