MC9200 Operating System BSP 13.54.02 - Hotfix CFE 01.00.00 Release Notes
Introduction
SPR 27865 reported an issue wherein the MC92 device does not pair with RS507 when using Telnet Client.
Description
The provided fix resolves the MC92 pairing issue with RS507 using Telnet Client.
Note: This fix works with latest Telnet client WLTE_MOT_MC92N0_WM65_7_3_196_AS.exe. This Telnet version is available to download from www.wavelink.com.
Contents
SPR27865_MC92_W65_en_135402_v1_0_WB.cab (HotFix package with Warm boot)
SPR27865_MC92_W65_en_135402_v1_0_NB.cab (HotFix package without Warm boot)
Device Compatibility
This HotFix CFE Package software release has been approved for use with the following Zebra devices.
Device |
Operating System |
BSP Version |
MC92N0 Premium |
WM 6.5 |
v13.54.02 |
Installation Requirements
The HotFix cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools.
- Windows Mobile Device Center (For Windows Desktops)
- SD Cards / Micro SD cards
- MDM Set up
Installation Instructions
For Normal installation of the PATCH:
- Windows Mobile Device Center (For Windows Desktops) Installation Instructions:
1. Copy "SPR27865_MC92_W65_en_135402_v1_0_WB.cab" file to the Application folder on the device.
2. Deploy the solution by tapping on the "SPR27865_MC92_W65_en_135402_v1_0_WB.cab" file.
3. After successful deployment of the "SPR27865_MC92_W65_en_135402_v1_0_WB.cab" file device will do an automatic warm boot.
- SD Cards / Micro SD cards Installation Instructions:
1. Copy "SPR27865_MC92_W65_en_135402_v1_0_WB.cab" file to the SD card.
2. Deploy the solution by tapping on the "SPR27865_MC92_W65_en_135402_v1_0_WB.cab"
3. After successful deployment of the "SPR27865_MC92_W65_en_135402_v1_0_WB.cab" file device will do an automatic warm boot.
For MSP or REMOTE installation of the PATCH:
1. Set up MDM (MSP, Soti, Airwatch, etc..) to send "SPR27865_MC92_W65_en_135402_v1_0_NB.cab" file to the application folder of the device.
2. To deploy the solution, setup in MDM to install the cab file "SPR27865_MC92_W65_en_135402_v1_0_NB.cab" file.
3. Changes will take effect after a manual reboot of the terminal or if MDM reboots device.
Release Date
September 2015