Chat with us
Loader
Establishing connection, please wait while we connect you.

Workabout Pro 4 Operating System BSP 2.0 - Hotfix CFE 2.3 - Localized Release Notes

Introduction

The Workabout Pro 4 is a modular, industrial hand held computer. Microsoft Windows CE Professional 6 is one of the two OS options for this device.

Description

! IMPORTANT ! 7528 Release 2.3 OS Patch v1.1 must be installed along with this OS image.

Improvements in the OS release:

- Australian Approvals support

- Added EMDK support for these APIs: AudioEx, Printer, Keyboard, Keylight, Display

- Improved EMDK support for Resource Co-ordinator API

- Added support for Stonetreet Bluetooth stack. To select stack:
        [HKEY_LOCAL_MACHINE\SOFTWARE\SymbolBluetooth]
        "SSStack"=dword:1
        Warm reset

- Wideband Audio support with Stonestreet Bluetooth

- Added support for Digital Zoom for image resolutions up to 3 Megapixels

- Improved JPEG compression quality for camera

- Add "Transmit AIM ID" option to Scanner Services

- Add support for SE965 Phase II Hardware

- SE4500 Performance Improvements

- Allow .NET applications to open the GPS intermediate driver port

- Upgraded WiFi stack

 

Contents

7528 Windows Embedded Handheld 6.5.3 OS Image v2.3

Device Compatibility

This software release has been approved for use with the following Symbol devices.

Device

Operating System

Workabout Pro 4 (7528)

Windows Embedded Handheld 6.5.3

 

Installation Requirements

The following components must be installed before using this product. 

  • 7528 Release 2.3 OS Patch v1.1

Installation Instructions

To update the operating system software of the WAP 4, follow the procedure below: 

  1. The firmware can be upgraded using a USB Memory Stick or using a microSD Card.

  2. The firmware file must be renamed 7528os.img

  3. Copy the file containing the firmware upgrade to the root directory of the USB memory stick or Micro SD card

  4. Install the USB memory stick into the docking cradle or install the Micro SD card into the WAP 4 in the Micro SD slot in the battery compartment

  5. Press and hold down the [Blue FN] key, the [SCAN] key and the [Power] key, simultaneously for a minimum of six seconds.

  6. When the update is complete, the device reboots to the main operating system.

  7. Remove the MicroSD card from the device to prevent the device from performing the upgrade process again on the next cold boot, and then disconnect external power. The device is now ready to be used.

  8. Install add-on cab file.

 

To install 7528 Release 2.3 OS Patch v1.1, follow the procedure below: 

  1. Copy patch cab file to SD or USB storage device.

  2. Ensure that the battery is present, and the device is in a powered docking station or snap-module.

  3. Insert the storage device.

  4. Boot the device.

  5. Using File Explorer, browse to the patch file on storage media.

  6. Double click on patch file.

  7. After installation is complete, the device will warm reset automatically.

Part Number and Release Date

P728XW65CPCB020300
P728XW65CPMI020300
P728XW65CTCB020300
P728XW65CTMI020300
P728XW65DECB020300
P728XW65DEMI020300
P728XW65ENCB020300
P728XW65ENMI020300
P728XW65FRCB020300
P728XW65FRMI020300
P728XW65ITCB020300
P728XW65ITMI020300
P728XW65JPCB020300
P728XW65JPMI020300
P728XW65KOCB020300
P728XW65KOMI020300
P728XW65SICB020300
P728XW65SIMI020300

 

December 12, 2014