EP10 Operating System BSP 3.6 Release Notes
Introduction
Built on the core technologies of the Omnii™ platform from, the EP10 packs full-sized functionality into a handy, ergonomic device. The operating system for EP10 is Windows Embedded Handheld 6.5.3.
Description
1. Update WiFi radio firmware to comply with ETSI EN 300 328 v1.8.1 standard requirements
2. Improved WWAN throughput
3. GCF compliance improvements
Contents
1. OS Image
2. Add-on cab file
Device Compatibility
This software release has been approved for use with the following Symbol devices.
Device |
Operating System |
EP10 | Windows Windows Embedded Handheld 6.5.3 |
Installation Requirements
· MicroSD card 2GB or greater formatted as FAT32 or USB storage device
Installation Instructions
1. Confirm that the Multi-Image is named 7515OS.img and copy it to a SD or USB storage device.
2. Remove or rename any other file on the storage device named 7515OS.img.
3. Ensure that the battery is present, and the device is in a powered dockingstation or snap-module.
4. Insert the storage device.
5. Boot the device into BooSt by pressing and holding the Blue + Power + Left Scan buttons (simultaneously) for 6 seconds.
6. The image should run, and load the appropriate files. Do not remove the storage device or power until the upgrade process has been successfully completed.
7. When the OS has installed, use the file manager to locate the Add-On cab (on your storage device), and install it by double clicking it. The EP10 will do an automatic restart in order to complete this installation process.
Part Number and Release Date
P715XW65CPCB030600
P715XW65CPMI030600
P715XW65CPWC030600
P715XW65CTCB030600
P715XW65CTMI030600
P715XW65CTWC030600
P715XW65DECB030600
P715XW65DEMI030600
P715XW65ENCB030600
P715XW65ENMI030600
P715XW65ENWC030600
P715XW65FRCB030600
P715XW65FRMI030600
P715XW65ITCB030600
P715XW65ITMI030600
P715XW65PBCB030600
P715XW65PBMI030600
P715XW65SICB030600
P715XW65SIMI030600
July 16, 2014