Chat with us
Loader
Establishing connection, please wait while we connect you.

MC67NA WEHH 6.5 - BSP v04.56.13 - HotFix CFE v01.05.00 Package Release Notes

Introduction

HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR hotfixes for given product software release / revision. 

HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy. Click here to view HotFix Package Policy. 

Description

CFE package CFE_MC67_NA_045613_WM_EN_v010500_NB.cab / CFE_MC67_NA_045613_WM_EN_v010500_WB.cab file includes the following HotFixes:

SPR  No. 

Synopsis

31218

Touch screen stops responding while using signature capture application

30040

When device gets warm boot, the radio signal gets full signal but after 2 minutes, the signal goes down and then up again.

27871

Modification of MCPD driver to resolve the issue wherein after critical suspend-resume Bluetooth takes more than 40 sec to recycle.

27938

Custom camera setting not persistent over warmboot. This CFE hotfix includes a new camera driver that will persistent the custom camera settings like focus mode, ISO, scene mode, flash mode and white balance mode, on device warmboot.

28381 

MC67NA Volume difference.
This issue is seen on all devices that are manufactured prior to mid-2014 and running the latest image 04.56.13. MC67NA has different h/w versions RevA, RevB and RevC. RevA and RevB h/w needs the old gain value to be applied and RevC h/w the new gain. TCHelper.dll was modified to recognize the correct h/w version and also apply the appropriate gain.


This HotFix CFE package CFE_MC67_NA_045613_WM_EN_v010500_NB.cab / CFE_MC67_NA_045613_WM_EN_v010500_WB.cab obsoletes the following HotFix CFEs: 

HotFix CFE version Product

CFE_MC67_NA_045613_WM_EN_v010100_e_WB.cab          

CFE_MC67_NA_045613_WM_EN_v010100_e_NB.cab

MC67NA          

CFE_MC67_NA_045613_WM_EN_v010200_e_WB.cab

CFE_MC67_NA_045613_WM_EN_v010200_e_NB.cab

CFE_MC67_NA_045613_WM_EN_v010300_e_WB.cab

CFE_MC67_NA_045613_WM_EN_v010300_e_NB.cab

CFE_MC67_NA_045613_WM_EN_v010400_e_WB.cab

CFE_MC67_NA_045613_WM_EN_v010400_e_NB.cab

Note: Latest CFE package includes previous CFE package hot fixes and new SPR hotfix.

Contents

CFE_MC67_NA_045613_WM_EN_v010500_WB.cab (CFE package with auto Warm boot)

CFE_MC67_NA_045613_WM_EN_v010500_NB.cab (CFE package without auto Warm boot)

Device Compatibility

This HotFix CFE Package software release has been approved for use with the following Zebra devices.

Device             

Operating System            

BSP Version

MC67NA

WM 6.5

v04.56.13

Installation Requirements

The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools. 

  • Windows Mobile Device Center (For Windows Desktops)
  • SD Cards / Micro SD cards
  • MDM set up

Installation Instructions

For Normal installation of the PATCH:

  • Windows Mobile Device Center (For Windows Desktops) Installation Instructions:
     

1.     Copy "CFE_MC67_NA_045613_WM_EN_v010500_WB.cab" file to the Application folder on the device.

2.     Deploy the solution by tapping on the "CFE_MC67_NA_045613_WM_EN_v010500_WB.cab" file.

3.    After successful deployment of the "CFE_MC67_NA_045613_WM_EN_v010500_WB.cab" file, device will do an automatic warm boot.

  • SD Cards / Micro SD cards Installation Instructions:
     

1.     Copy "CFE_MC67_NA_045613_WM_EN_v010500_WB.cab" file to the SD card.

2.     Deploy the solution by tapping on the "CFE_MC67_NA_045613_WM_EN_v010500_WB.cab"

3.  After successful deployment of the "CFE_MC67_NA_045613_WM_EN_v010500_WB.cab" file, device will do an automatic warm boot.

For MSP or REMOTE installation of the PATCH:

1.     Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC67_NA_045613_WM_EN_v010500_NB.cab" file to the application folder of the device.

2.     To deploy the solution, setup in MDM to install the cab file "CFE_MC67_NA_045613_WM_EN_v010500_NB.cab" file.

3.     Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

Release Date

February, 2017