Chat with us
Loader
Establishing connection, please wait while we connect you.

MC67ND WM 6.5 - BSP v04.56.13 - HotFix CFE v01.03.00 Package Release Notes

Introduction

HotFix CFE (Cumulative Fixes from Engineering) Package contains multiple SPR Hotfixes into a single package. The HotFix CFE Package helps the end users to keep up to date with all the SPR Hotfixes for given product software release / revision. 

HotFix CFE packages are validated only by engineering validation team and the package follows Zebra Technologies HotFix Package Policy.

Description

CFE package CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab/CFE_MC67_ND_045613_WM_EN_v010300_e_NB.cab file includes the following HotFixes:

 SPR  No                             

Synopsis

30615

Touch panel sporadic failure.

30276

Imager Illumination is ON when LampOn property is False.

27938

Custom camera setting not persistent over warm boot. This CFE hotfix includes a new camera driver that will persistent the custom camera settings like focus mode, ISO, scene mode, flash mode and white balance mode, on device warm boot.

 

This HotFix CFE package CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab / CFE_MC67_ND_045613_WM_EN_v010300_e_NB.cab obsoletes the following HotFix CFEs: 

HotFix CFE version

Product

CFE_MC67_ND_045613_WM_EN_v010100_e_WB.cab

CFE_MC67_ND_045613_WM_EN_v010100_e_NB.cab

MC67ND

CFE_MC67_ND_045613_WM_EN_v010200_e_WB.cab                          

CFE_MC67_ND_045613_WM_EN_v010200_e_NB.cab

 

Note: Latest CFE package includes previous CFE package hot fixes and new SPR hotfix.

Package Details

CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab (CFE package with auto Warm boot)

CFE_MC67_ND_045613_WM_EN_v010300_e_NB.cab (CFE package without auto Warm boot)

Device Compatibility

This HotFix CFE Package software release has been approved for use with the following Zebra devices.

Device         

Operating System                   

BSP Version

MC67ND

WM 6.5

v04.56.13

Installation Requirements

The HotFix CFE cab can be deployed to the Mobile device through any one of the below mentioned methods. For installing the cab, the users should have at least one of the below mentioned tools. 

- Windows Mobile Device Center (For Windows Desktops)

- SD Cards / Micro SD cards

- MDM set up

 

Installation Instructions

 

For Normal installation of the PATCH:

Windows Mobile Device Center (For Windows Desktops) Installation Instructions:

    1.     Copy "CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab" file to the Application folder on the device.

    2.     Deploy the solution by tapping on the "CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab" file.

    3.    After successful deployment of the "CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab" file, device will do an automatic warm boot.

SD Cards / Micro SD cards Installation Instructions:

    1.     Copy "CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab" file to the SD card.

    2.     Deploy the solution by tapping on the "CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab".

    3.  After successful deployment of the "CFE_MC67_ND_045613_WM_EN_v010300_e_WB.cab" file, device will do an automatic warm boot.

For MSP or REMOTE installation of the PATCH:

    1.     Set up MDM (MSP, Soti, Airwatch, etc..) to send "CFE_MC67_ND_045613_WM_EN_v010300_e_NB.cab" file to the application folder of the device.

    2.     To deploy the solution, setup in MDM to install the cab file "CFE_MC67_ND_045613_WM_EN_v010300_e_NB.cab" file.

    3.     Changes will take effect after a manual reboot of the terminal or if MDM reboots device.

 

Release Date

December, 2016