PRODUCT SPEC SHEET
ES 6510 MANAGED WALL SWITCH

ES 6510 MANAGED WALL SWITCH

QUICK AND EASY EXPANSION OF ETHERNET IN HOTELS, DORMITORIES, AND HOSPITALS

DEPLOYMENT FLEXIBLITY

The ES 6510 was designed to quickly extend multiple layer 3 Ethernet ports to any wall plate - easily converting a single Cat5/6 Ethernet cable into multiple switched, managed Ethernet ports.
The ES 6510 can be installed on any flat wall, or over a structured wiring telecom box in minutes without specialized tools or training. The sleek “hide in sight” design and small size blends with the room aesthetics and consumes little additional space. Installation is always predictable and repeatable, dramatically lowering the cost of expanding Ethernet connectivity.

MANAGEMENT FLEXIBILITY

The ES 6510 supports three management models; allowing the network administrator to pick the best management for the application.
1. Standalone Device As a standalone device, each ES 6510 includes the full management suite and supports Telnet/SSH, HTTP/HTTPS, and SNMP.
2. Virtual Controller When configured as a virtual controller, one ES 6510 becomes the controller for a network of up to 24 other ES 6510s in the same enterprise.
3. Dedicated RFS Controller The ES 6510 can be managed by any of the Symbol RFS Controllers such as the RFS 4000, RFS 6000, RFS 7000 or NX 9500.

MODULAR FLEXIBILITY

Often, an existing structured wire plate will have a secondary connector such as an RJ11 port, or a TV coax port. The ES 6510 features a snap-in port for any keystone style connector. Thus deploying the ES 6510 over an existing wall plate will not block out any secondary cable that may share the same plate.

SPECIFICATIONS CHART

Ethernet LAN 3 x 10/100Mb LAN ports
1 x 10/100Mb uplink LAN port 8-wire RJ45 connector. IEEE 802.3 10/100BTX
Policy
Enforcement
Layer-2 firewall with src/dest MAC/VLAN/Ethertype, match on in-bound and out-bound packets
Layer-3 firewall with src/dest IP/Port/Protocol, match on in-bound and out-bound packets Stateful packet inspection, Per IP flow statistics
802.1P COS or DSCP bit mark or re-mark for Layer-2 and/or Layer-3 priority enforcement
Networking 802.1Q VLAN Access or Trunk ports, VID 1-4094. CDP and LLDP per intrface. 802.1x and MAC authentication per port
Management Access: Telnet, SSH, HTTP, HTTPS, SNMPv2/V3 Management status, firmware upgrade
Power 802.3af PoE compliant. 5 watts typical
Physical 4.9”x2.7”x1.2” (124mm x 70mm x 29mm). 12oz (0.34Kg)
Environmental 0 - 40 degrees Celsius ambient temperature, 5% to 90% NC
Mounting Universal mounting bracket for worldwide telecom plates; mounting options include over a telecom wall plate or flush surface mount. RJ45-to-RJ45 cable included
Compliance UL EU EN 60950-1 2nd Ed., ANZ C-Tick, UL 2043; FCC Part 15 Subpart B, EN 55022: 2006 + A1: 2007, ICES – 003 (Class B) EN 55024: 1998 + A1: 2001 + A2: 2003; EU RoHS Directive 2002/95/EC; CE, IC, FCC

TYPICAL DEPLOYMENT ALONG WITH AP 6511


In markets such as hospitality, the ES 6510 is an ideal complementary product with the AP 6511. The Symbol AP 6511 is a two stream 802.11a/b/g/n access point that typically covers up to 5 hotel guest rooms. In this deployment example, the ES 6510 is installed in the rooms where an AP 6511 is not required. IPTV, minibar access, or VoIP telephony typically require a hard-line Ethernet network. By combining the AP 6511 and ES 6510, the result is 100% coverage with managed Ethernet ports and wireless LAN.