The ES 6510 was designed to quickly extend multiple layer 3 Ethernet ports to any wall plate - easily converting a single Cat5/6 Ethernet cable into multiple switched, managed Ethernet ports.
The ES 6510 can be installed on any flat wall, or over a structured wiring telecom box in minutes without specialized tools or training. The sleek “hide in sight” design and small size blends with the room aesthetics and consumes little additional space. Installation is always predictable and repeatable, dramatically lowering the cost of expanding Ethernet connectivity.
The ES 6510 supports three management models; allowing the network administrator to pick the best management for the application.
1. Standalone Device As a standalone device, each ES 6510 includes the full management suite and supports Telnet/SSH, HTTP/HTTPS, and SNMP.
2. Virtual Controller When configured as a virtual controller, one ES 6510 becomes the controller for a network of up to 24 other ES 6510s in the same enterprise.
3. Dedicated RFS Controller The ES 6510 can be managed by any of the Symbol RFS Controllers such as the RFS 4000, RFS 6000, RFS 7000 or NX 9500.
Often, an existing structured wire plate will have a secondary connector such as an RJ11 port, or a TV coax port. The ES 6510 features a snap-in port for any keystone style connector. Thus deploying the ES 6510 over an existing wall plate will not block out any secondary cable that may share the same plate.
|Ethernet LAN||3 x 10/100Mb LAN ports1 x 10/100Mb uplink LAN port 8-wire RJ45 connector. IEEE 802.3 10/100BTX|
|PolicyEnforcement||Layer-2 firewall with src/dest MAC/VLAN/Ethertype, match on in-bound and out-bound packetsLayer-3 firewall with src/dest IP/Port/Protocol, match on in-bound and out-bound packets Stateful packet inspection, Per IP flow statistics802.1P COS or DSCP bit mark or re-mark for Layer-2 and/or Layer-3 priority enforcement|
|Networking||802.1Q VLAN Access or Trunk ports, VID 1-4094. CDP and LLDP per intrface. 802.1x and MAC authentication per port|
|Management||Access: Telnet, SSH, HTTP, HTTPS, SNMPv2/V3 Management status, firmware upgrade|
|Power||802.3af PoE compliant. 5 watts typical|
|Physical||4.9”x2.7”x1.2” (124mm x 70mm x 29mm). 12oz (0.34Kg)|
|Environmental||0 - 40 degrees Celsius ambient temperature, 5% to 90% NC|
|Mounting||Universal mounting bracket for worldwide telecom plates; mounting options include over a telecom wall plate or flush surface mount. RJ45-to-RJ45 cable included|
|Compliance||UL EU EN 60950-1 2nd Ed., ANZ C-Tick, UL 2043; FCC Part 15 Subpart B, EN 55022: 2006 + A1: 2007, ICES – 003 (Class B) EN 55024: 1998 + A1: 2001 + A2: 2003; EU RoHS Directive 2002/95/EC; CE, IC, FCC|