ZT400 802.11a/c Radio Option Support

Article ID: 21701915

Issue / Question

Can all configurations of ZT400 printers have the 802.11ac radio installed?

Which firmware supports the 802.11ac radio option?

Can the older 802.11n radio work on ZT400 printers with the color display front panel?

Applicable To

ZT410, ZT410R, ZT420, ZT420R

Resolution / Answer

The ZT400 series now has an 802.11ac Wireless Card as an option.   


The 802.11ac wireless card can be used in ZT400 printers without the color display front panel, but the firmware must be v75.20.14Z or later.
To download the ZT400 firmware, please Click Here>>

The part number for the ZT400 802.11ac wireless card option is P1083320-037A, P1083320-037B or P1083320-037C depending on region.

The older 802.11n wireless card will also work in units with the color display front panel.



The ZT400 802.11ac Wireless Card comes with an on-board Bluetooth 4.1 radio.
When installed, the firmware will switch from the Bluetooth 2.1 radio in the front panel, to the Bluetooth 4.1 radio on the wireless card.
The MAC address will be different as this is a different radio.
 

+ Applicable Products

  • ZT410 Industrial Printer
  • ZT410 RFID Industrial Printer
  • ZT420 Industrial Printer
  • ZT420 RFID Industrial Printer