Black Mark Sensor Positioning on the TTP2100

Article ID: 99089930


Topic or Information

The TTP2100 printer utilizes 4 sensors to detect blackmark or gap media.

Applies To

Zebra TTP2100 Series Kiosk Printers


Parameter 63 (BM sensor)  allows you to select which blackmark or gap detection sensor to use.

The following are the command sets to change the BM sensor value:

<ESC>&P<63><0> - Auto, selects BM1 or BM4 depending on paper width. (This is the default parameter)

<ESC>&P<63><1> - Force the use of sensor BM1  (edge sensor for 82.5mm paper)

<ESC>&P<63><2> - Force the use of sensor BM2 (center sensor)

<ESC>&P<63><3> - Force the use of sensor BM3 (sensor 17.5mm from center)

<ESC>&P<63><4> - Force the use of sensor BM4 (sensor 12.5mm from center)


See attachement  Sensors.pdf for more details on sensor placement, and Sensor Closeup.jpg displays a close up picture of the sensor number placement.

+ Product Codes

  • TTP 2100 Series Kiosk Receipt Printers
  • TTP 2110 Kiosk Printer
  • TTP 2130 Kiosk Printer