Controlling monochrome print speed with the "+V" command on Zebra Card Printers
Article ID: 27812698
Topic or Information
Modifying monochrome ribbon print speed with the +V command on Zebra EPCL Card Printers
EPCL enabled Zebra Card Printers
Monochrome print quality can sometimes be improved by increasing or decreasing the speed at which the monochrome panel or monochrome ribbon prints on the card.
Monochrome print speed can be adjusted with a manual command in the “tools” section of the windows driver.
The command which controls the monochrome print speed is “+V value” where value is a single number ranging from 1 to 9. The higher the number the slower the print speed.
EPCL Programmers Manual Read More>>
+ Product Codes
- P330i Card Printer
- Value Class Card Printer