Creating an SNMP MIB File on a QLn Printer using Zebra Setup Utilities
Article ID: 87169046
The QLn printer can generate a mib file and store the mib file in E: memory.
Zebra QLn Series Mobile Printers
Communication with the printer via USB, Serial, Wireless, or Bluetooth. Also, the ability to send a file/command to the printer.
The Zebra Setup Utility can be used to both send a command to the printer to create a mib file and be used to retrieve the mib file. The DO command "ip.snmp.create_mib" is used to create a mib file in the printers memory.
! U1 do "ip.snmp.create_mib" "QLnMib"
This command will create a file called QLNMIB that is in the printers memory. The command above can be sent using the Zebra Setup Utility using the communications window (Open Communications With Printer button).
To retrieve the files contents, the Zebra Setup Utility communications window can also be used.
The DO command "file.type" is used to return the contents of the file into the bottom section of the Zebra Setup Utilities communication window(Open Communications With Printer button)..
! U1 do "file.type" "E:QLNMIB"
This command will return the contents of the file QLNMIB to the bottom section of the Zebra Setup Utilities communications window.
Sending File to Mobile Printers Read More>>
USB Communication Information Read More>>
- QLn Series Healthcare Mobile Printers
- QLn Series Mobile Printers
- QLn220 Healthcare
- QLn220 Mobile Printer
- QLn320 Healthcare
- QLn320 Mobile Printer
- QLn420 Mobile Printer