Cannot Configure Keyguard Encryption on the CB1000

Article ID: 66347367

Symptom

Cannot Configure Keyguard Encryption on the CB1000 Configure the Keyguard shared keys in the WEP fields on the CB1000.

Facts

CB1000

Resolution

With firmware version 3.26 or later the CB-1000 supports Keyguard encryption, however, there is no option on the CB1000 Encryption tab specifically for Keyguard.

Symptom
  • Cannot configure Keyguard encryption.
  • An option for Keyguard does not show up on the CB1000 Encryption tab.
  • Can only configure WEP on the CB1000.
Answer
  1. Select the Radio tab on the CB1000.
  2. Select the Encryption tab and check the Enable Encryption box.
  3. Type the desired 26 hexadecimal Keyguard encryption keys into the spaces provided. 
Note: Before each 26 character Keyguard key you will need to type 0x.  

Example:
            0x982373af2938465af38476599282

This rule applies to the CB-1000 only.