Default Gateway shows when configuring the Zebra Print Server from the Web Page

Article ID: 47236033



Topic or Information

Configuring the Zebra Print Server on a Link OS compatible printers via the Web Page Print Server setup causes the Gateway to default to 

Applies To

Link OS compatible printers using the internal Print Server Option

ZD500 Series, ZT200 Series, ZT400 Series


An issue has been noted when configuring the Zebra Printer using the Print Server Settings link on the printer web page where the Default Gateway IP settings are not saved. When exiting the web page the Default Gateway will indicate regardless of the value a user configures. 

User-added image


To configure the print server select the View and Modify Printer Settings link and enter the printer password (1234). This will allow access to the Printer's Network Settings.


User-added image

Settings changed using this method will allow saving the configured values.

 User-added image



Keith E

+ Product Codes

  • ZD410 Series
  • ZD410D
  • ZD420 Series
  • ZD420-HC
  • ZD420C
  • ZD500 Desktop Printer
  • ZD500 Desktop Printer
  • ZT200 Series Industrial Printers
  • ZT210 Industrial Printer
  • ZT220 Industrial Printer
  • ZT230 Industrial Printer
  • ZT400 Series Industrial Printers
  • ZT410 Industrial Printer
  • ZT420 Industrial Printer