Set-Up the Zebra Desktop printer Internal Wired 10/100 and Wireless Plus Print Servers

Article ID: 16308344



Topic or Information

Configuring Network Settings and Defaulting the Print Server
How to default the network settings 
Setting the 10/100 Print Server to Factory Defaults

Applies To

 G Series Desktop, LP/TLP 2824 Plus, & HC100 Printers with the ZebraNet Print Server Option


The Desktop printer requires a local connection (USB, Parallel, Serial) to allow for network configuration. The network settings can be done using the Zebra Setup Utility or ZebraNet Bridge. 

Before you can communicate with the printer on the network, the ZebraNet Print Server's TCP/IP settings need to be configured.   The default of the ZebraNet Print Server is to receive the settings from a DHCP Server.   If you need to assign the TCP/IP setting manually you can use ZebraNet Bridge or the Zebra Setup Utility. 

  • ZebraNet Bridge can be used to discover and assign the desired network settings. Read More>>
  • The Zebra Setup Utility has a network setup wizard that can be used to configure your printer for a wired or wireless network Read More>>

Defaulting the Network Settings using the Four Flash Button Method

User-added image

Button Flash Details Read More>>

+ Product Codes

  • 2824 Plus Series
  • G-Series GC Desktop Printers
  • G-Series GK Desktop Printers
  • G-Series GX Desktop Printers
  • GC420d Desktop Printer
  • GC420t Desktop Printer
  • GK420 Healthcare Desktop Printers
  • GK420d Desktop Printer
  • GK420d Healthcare Desktop Printer
  • GK420t Desktop Printer
  • GK420t Healthcare Desktop Printer
  • GT800 Desktop Printer
  • GX420Rx Desktop Printer
  • GX420d Desktop Printer
  • GX420t Desktop Printer
  • GX430d Desktop Printer
  • GX430t Desktop Printer
  • HC100 Wristband Printer
  • HC100 Wristband Printer
  • LP 2824 Plus Desktop Printer
  • TLP 2824Plus Desktop Printer