Issue / Question
How to adjust the Beep After Good Decode, Beeper Tone, Suppress Power Up Beeps, Beeper Volume or Beeper Duration
Applicable To
Handheld scanners
Resolution / Answer
Beep After Good Decode
Scan one of the following barcodes to select whether or not the linear imager scanner beeps after a good decode.
If you select the Do Not Beep After Good Decode barcode, the beeper still operates during parameter menu scanning and to indicate error conditions.
Beeper Tone
To select a decode beep frequency (tone), scan one of the following barcodes:
Suppress Power Up Beeps
Scan one of the following barcodes to suppress or not suppress linear imager scanner beeps upon power-up.
Beeper Volume
To select a beeper volume, scan either the Low Volume, Medium Volume, or High Volume barcode.
Beeper Duration
To select the duration for the beeper, scan one of the following barcodes: