Changing or removing scanner Auto Aim Trigger Mode

Article ID: 10531750

Issue / Question

How can I change or remove the Auto Aim trigger mode feature on my scanner?

Applicable To

DS22x8, 3600, DS81x8, DS46x8, DS43x8, DS9908

Resolution / Answer

Scan one of the desired trigger modes below to change or remove Auto Aim. Please see descriptions for each trigger mode feature.

Standard (Level) - A trigger press activates decode processing. Decode processing continues until the bar code decodes, you release the trigger

Presentation (Blink) - The scanner activates decode processing when it detects a bar code in its field of view.
After a period of non-use, the scanner illumination and aimer settings change according to the default Low Light Scene Detection setting.
The scanner re-activates decode processing when the scanner senses motion


+ Applicable Products

  • DS2208-HC
  • DS2208-SR
  • DS2278-HC
  • DS2278-SR
  • DS3608-DP DS3678-DP Ultra Rugged Scanners
  • DS3608-DPA
  • DS3608-DPX
  • DS3608-ER DS3678-ER Ultra Rugged Scanners
  • DS3608-HD DS3678-HD Ultra Rugged Scanners
  • DS3608-HP DS3678-HP Ultra Rugged Scanners
  • DS3608-SR DS3678-SR Ultra Rugged Scanners
  • DS3678-DPA
  • DS3678-DPX
  • DS4608-DL
  • DS4608-DPE
  • DS4608-HC
  • DS4608-HD
  • DS4608-SR
  • DS4608-XD
  • DS8108-HC
  • DS8108-SR
  • DS8178-HC
  • DS8178-SR
  • DS9908-HD
  • DS9908-SR
  • DS9908R-HD
  • DS9908R-SR
  • Symbol DS4308
  • Symbol DS4308-HC
  • Symbol DS4308P