Checking RS419 RS507 Scanner Firmware Version

Article ID: 89679822

Issue / Question

Where to check for the RS419 or RS507 scanner firmware version when tethered to WT41N0?

Where to check for the RS507 Bluetooth scanner firmware version when paired and connected to CE / WM device?

Where to check for the RS507 Bluetooth scanner firmware version when paired and connected to Android device?

Applicable To

RS419, RS507

Resolution / Answer

A. RS419 or RS507 tethered to WT41N0

  1. Open DataWedge settings and make sure the status is ready.
  2. Navigate to DataWedge> Basic> Barcode input> SSI Scanner Driver> RSM params> More... (to go to next page)
  3. See Firmware version. Example PAAACS00-006-R02.



 

B. RS507 Bluetooth paired and connected to Windows CE / WM device

  1. Open DataWedge settings and make sure the status is ready.
  2. Navigate to DataWedge> Basic> Scanner input> Bluetooth SSI Scanner Driver> RSM params> More... (to go to next page)
  3. See Firmware version. Example PAAACS00-006-R02.


 

 

C. RS507 Bluetooth paired and connected to Android device with Device Central

  1. Open Device Central 
  2. Select RS507 from the list of connected peripherals
  3. Look under Firmware Version. Example PAAACS00-006-R02.


 

 

D. RS507 Bluetooth paired and connected to Android device without Device Central

  1. Open DataWedge settings 
  2. Tap on the menu button (3 dots upper-right) 
  3. Select About 
  4. See Scanner Firmware section. Example: PAAACS00-006-R02

+ Applicable Products

  • RS419 Ring Scanner
  • RS507 Hands Free Imager