Configure Bluetooth Scanner Connection Idle Timeout on Android

Article ID: 62951686

Issue / Question

How to modify Bluetooth scanner connection idle timeout using Android DataWedge?

Applicable To

Supported Zebra Android devices

 

TC51, TC20, TC56, TC75X, MC3300, TC55, TC70X, VC80X, MC9200

Resolution / Answer

Overview:

By default after 10 minutes of being idle (i.e., no scanning), the RS507 will go into standby mode to conserve battery power. It will not work (thus acting as if it is not paired) until the restore key is pressed.

DataWedge can be used to modify 'Connection Idle Time'

1. Open DataWedge
2. Select target profile (example Profile0)
3. Scroll down and select Scan params
4. Tap 'Connection Idle Time'

  • Default = 600 (in seconds)
  • Maximum = 1800
  • Disable = 0

+ Applicable Products

  • MC3300
  • MC9200 Mobile Computer
  • TC20
  • TC51
  • TC55 Touch Computer
  • TC56
  • TC70x
  • TC75x
  • VC80X