Configure Omnii XT15 Fitted with SE4500 2D Imager to Read GS1-128 barcodes

Article ID: 83144220

Issue / Question

XT15 installed with SE4500 2D imager will not read GS1-128 barcodes

Applicable To

XT15 installed with SE4500

Resolution / Answer

Overview:

Default configuration will not read GS1-128 barcodes

Resolution:

In Imager settings enable Gs1 'Emulate as Code128' in Barcoding tab, under 'Barcode Presets' for 'My Default' profile.

General Instructions:

1. Launch 'Imagers' from within Control Panel

    


2. In Barcoding tab, under 'Barcode Presets' activate 'My Default'


3. Click on [Edit], scroll down to Gs1, expand it to view and enable 'Emulate as Code128'


Reminder:

If unit is deployed with a Total Recall backup and restore profile, please delete it and create a new profile.

+ Applicable Products

  • Omnii XT15