Issue / Question
How to configure scanners to transmit the characters NR(No Read)
Applicable To
All supported handheld scanners (DS2200 Series, DS4308, DS8100 Series, DS9208, DS9908, LS1203, LI2208, LS2208, LS4208, LI4278, LI/DS3600 Series, etc)include CS3000, CS4070 and MT2000
Resolution / Answer
Transmit “No Read” Message
- Scan a bar code below to select whether to transmit a No Read message.
- Enable this to transmit the characters NR when a successful decode does not occur before trigger release or the Decode Session Timeout expires.
Refer to Decode Session Timeout configuration to set the maximum time decode processing continues during a scan attempt.
(It is programmable in 0.1 second increments from 0.5 to 9.9 seconds. The default timeout is 9.9 seconds)
- Disable this to send nothing to the host if a symbol does not decode.
