Configure the DS3608 Scanner and VC70 to scan in Wavelink TelnetCE

Article ID: 65309416

Issue / Question

Unable to get the scanner to decode in the Wavelink TelnetCE client on the VC70 through Serial connection.

Applicable To

VC70, DS3608, TelnetCE, Wavelink

Resolution / Answer

VC70 requires a OS Patch included in the latest REV F of the OS to communicate with the DS3608 VIA SSI Serial. Once this is updated to BSP 06.57.02, you can use the same Configuration steps found in the VC70 Product Reference Guide for the SSI Serial configuration for DS3508 to TelnetCE.

VC70 Home Page for OS Upgrade images and Patches:
Read More>>

Download an install OS update VC70N0 CE 7.0 BSP 06.57.02 (Rev. F), instructions are in the Release notes.
Read More>>

See the VC70 PRG for instructions to enable the SSI Serial connection with the DS3508 to TelnetCE on Page 5-8
Connect DS3508-ER Corded Scanner to a Serial Port of the VC70 (SSI)
Read More>>

+ Applicable Products

  • DS3608-DP DS3678-DP Ultra Rugged Scanners
  • DS3608-ER DS3678-ER Ultra Rugged Scanners
  • DS3608-HD DS3678-HD Ultra Rugged Scanners
  • DS3608-HP DS3678-HP Ultra Rugged Scanners
  • DS3608-SR DS3678-SR Ultra Rugged Scanners
  • VC70N0