Issue / Question
How to pair and connect the RS507 to a supported Zebra Android device?
Zebra Android KitKat or newer
Resolution / Answer
For the RS507
Perform a clean boot:
1. Remove battery
2. Press and hold the Restore Key.
3. Insert the battery
4. Continue to press and hold the Restore Key for about five seconds until a chirp is heard and the Scan LEDs flash green.
* The RS507 is now in its factory default configuration.
On the Zebra Android device, open the Bluetooth Pairing Utility
1. Scan the pairing barcode using the RS507
2. RS507 will be paired and connected.