Enable COM port to use with a Bluetooth scanner which can persist cold boot
Article ID: 52601722
Issue / Question
How to enable COM port to use with a Bluetooth scanner like the RS507 which can persist cold boot?
Resolution / Answer
1. Install StartupCtl. Read More>>
2. Edit the onReset.txt file (My Device> Application> StartUpCtl> OnReset> OnReset.txt)
at the bottom of the file, enter the following then save.
delay 10 \Windows\BTScannerCtlPanel.exe /a
3. To test perform a cold boot. After the device reboot, the default COM port to use with a Bluetooth scanner is automatically re-enabled
|Before cold boot||After a cold boot|
+ Applicable Products
- MC3200 Mobile Computer
- MC9200 Mobile Computer
- RS507 Cordless Ring Scanner