Enable Continuous Read in DataWedge for Android

Article ID: 85361894

Issue / Question

How to enable continuous read in DataWedge for Android

Applicable To

All Zebra Android device with built-in scanner. Example TC20

Resolution / Answer


This article provides a way to enable continuous read in DataWedge settings for Android. A press and hold of the scan trigger will continuously scan barcodes.


  1. Open DataWedge
  2. Select target profile. Example Profile0 (default)
  3. Select 'Configure scanner settings'
  4. Select 'Reader params'
  5. Select 'Aim Type'
  6. Change the value to 'Continuous Read'
  7. Close DataWedge


+ Applicable Products

  • TC20