How to deploy Velocity Profile using StageNow

Article ID: 71808855

Issue / Question

How can I use StageNow to deploy my Velocity WLDEP file?

Applicable To

All-Touch Terminal Emulation (ATTE), Velocity Client for Android

Resolution / Answer

NOTE Download StageNow to your PC.


Procedure:

 

  1. Open StageNow on your PC.
  2. Click + Create new Profile.
  3. Select the required MX version for your unit from the drop-down menu.
  4. Select Xpert Mode and click Create.  


  5. From the WIZARD tab, select FileMgr


  6. In the FileMgr configuration screen, set the Target Path to:
For Velocity Client version 2.1.6 or older, use this:
/sdcard/com.wavelink.velocity/files and specify the name of the WLDEP file.
 
See example:
/sdcard/com.wavelink.velocity/files/Velocity.wldep

 

For Velocity Client version 2.1.8 or newer, use this:
/sdcard/Android/data/com.wavelink.velocity/files and specify the name of the WLDEP file.

See example:

/sdcard/Android/data/com.wavelink.velocity/files/Velocity.wldep
  1. Apply the Source file (your saved WLDEP file). 


  2. Once done, click Complete Profile and generate the StageNow barcode

+ Applicable Products

  • StageNow
  • StageNow