Issue / Question
Tuning Datawedge Decode Volume in CE or WM Devices
Applicable To
All CE and WM devices with Datawedge installed.
Resolution / Answer
Steps:
- Look for Datawedge via Start > Settings > Control Panel/System
- Click basic Configuration in Datawedge Main screen.
- Click Scanner input and then select the scanner model that shown in the next page. Eg. MegaPixel Imager or 1D Scanner Driver
- Click More and look for Feedback.
- Look for Good Decode > Beeper and Volume. Adjust the Volume value. Note that only 1 until 3 (integer) allowed for input field.
- Press Home button to exit and save all the settings.