VC80 Macro setup using My-T-Soft Setup

Article ID: 10732361

Details

Issue / Question

How to setup a macro key to launch an application or open a website?

This article provides a way to setup Macro using My-T-Soft Setup

Applicable To

VC80 Windows OS

Resolution / Answer

1. Open VCControlPanel (there should be a short-cut from desktop)

User-added image


2. Click on Bezel Keyboard

User-added image


3. Enable 'Use My-T-Soft macro mapping’ (slide the switch from left to right)

User-added image


4. Close VCControl Panel 
5. Open My-T-Soft (there should be a short-cut from desktop)

User-added image


6. Open Menu

User-added image


7. Select My-T-Soft Setup

User-added image


8. Click on Build-A-Macro

User-added image


9. Under 'Select Macro Panel' select ‘VC80 - Zebra VC80 Macro Panel

User-added image


10. Click on desired Macro Key (example M1)

User-added image


11. Under 'This Key Will...' select 'Launch Application'
12. Under Application, type the application executable name (example iexplore.exe)
13. Click OK to save

User-added image


14. Click on next desired Macro key (example M2)
15. Under 'This Key Will...' make sure 'Activate Keystroke Macro' is selected
16. Under 'Keystroke Macro', type the desired URL followed by [Enter] (example http://www.zebra.com[Enter])
17. Click on OK to save

User-added image


18. Close My-T-Soft Setup

For more info see Chapter 5 – Build-A-Macro – My-T-Soft for Windows User Guide