How Do I Determine the Hex Value for a Key within Wavelink TelnetCE?

Article ID: 67635289

Question

How Do I Determine the Hex Value for a Key within Wavelink TelnetCE?

Answer

The hex value for any key on a mobile unit (assuming it is an active key) can be viewed within the Wavelink TelnetCE client
  1.     Start the Wavelink TelnetCE client on the mobile unit (image on left, below).
  2.     Press Func + Ctrl + D (press and release each key) to access the Diagnostic Menu
  3.     Press W to start the Windows Keyboard Test.
  4.     Press any key to view its hexadecimal value. This example uses F7.
    •     Notice the Key Code is 0076, which is the same as 0x76
  5.     If you are using the hex value to create a Menu Toggle Key, enter the Key Code as 0x76.