How Do I Set the P360 or P460 for an Enter Suffix?

Article ID: 11049752

Question

How do make the P360 or P460 to send an enter after scanned data?

Facts

P360 P460

Answer

Data sent to host needs to be followed by an enter key

Answer
A suffix can be set through the Phaser System Menu by following these steps:
  1.  To access the System Menu using the keypad press <Func>, then the <*>, then <Func> followed by <BK>. The following will appear:
User-added image
  1. Press Enter to go into System Setup.
  2. Press the down arrow key until Set Scan Options is shown.
  3. Press Enter.
  4. Press the down arrow key until <Data><Suffix> is shown.
  5. Press Enter.
  6. Press up arrow once to Back To Main.
  7. Press Enter.
  8. Press up arrow once to Return to App.
  9. Press Enter.
Data sent to the host will now be appended by an Enter.