How to Change the SIP Control to Manual in Symbol PocketBrowser?

Article ID: 13596420

Question

How to Change the SIP Control to Manual in Symbol PocketBrowser?

Answer

By default Symbol PocketBrowser has the SIP control set to Auto.


The SPB.reg file needs to be edited and a key needs to be added so Symbol PocketBrowser can be manually invoked.
  1. Pull the SPB.reg file off of the terminal using ActiveSync and place it on your PC.  It will be located in the \Application folder.
  2. Right click on the SPB.reg file and choose edit.
  3. Change the key listed below so the dword shows eight 0’s as noted below:
    • [HKEY_CURRENT_USER\SOFTWARE\Symbol\SymbolPB\Tags\SIPControl]
      "Manual"=dword:00000000
  4. Save the file.
  5. Using ActiveSync, take the SPB.reg file and overwrite the one in the \Application folder.
  6. Cold boot the terminal.