How to Enable HotSpot on the WS2000?

Article ID: 41977858

Question

How to Enable HotSpot on the WS2000?

Answer

Nothing happens when HotSpot is selected in the WS2000 GUI.

Through the GUI:
  1. Click on Wireless
  2. Move the horizontal scroll bar to the far right and place a check mark under the HotSpot column that belongs to the WLAN.
  3. Click Apply to save your settings.

Through the CLI:
  1. Go to admin(network.wlan.hotspot)
  2. Use the following command: set modeWLAN index #enable.
  3. Replace WLAN index# with the index# for the WLAN that you want to designate a HotSpot.