Question
How to Programmatically Set the Aim Duration on an MC90xx to Be Cold Boot Persistent?
Article ID: 64843729
How to Programmatically Set the Aim Duration on an MC90xx to Be Cold Boot Persistent?
Facts
Unable make MC90xx aim duration persist after a cold boot. MC90xx
Answer
Cold booting sets the control panel settings back to factory defaults.
Create a registry key and place it in the Application folder of the MC90xx.
Create a registry key and place it in the Application folder of the MC90xx.
- Set the duration for timed aim modes:
- *Aim Duration is the time for which the laser will be enabled, when the “Aim Type” is either “Trigger” or “TimedHold”. The value specified is in milliseconds with a Range = 0-60000, in increments of 100. The default is set to 500ms.
- The registry key can be found at:
-
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\BarCodeReader\Settings] "ReaderParams"=
-
- Export the registry key and place the .reg file into the Application folder on the device.
- Cold boot to test.
