Question
How to rest a Telxon Device?
Article ID: 41683170
How to rest a Telxon Device?
Facts
Telxon terminal will not boot into application. Terminal application is locked up.
Answer
Perform a 3-key reset.
- Power terminal off.
- Hold down the lower left and lower right keys simultaneously.
- Press and release the power (ON/OFF) key.
- Press 6 and the terminal will display TP_ _.
- Press 5, then 9.
- Press Enter then *.
- Hold down the 3 key until the device beeps three times.
- *Note: If the display reads “SYS-MODE”, press the clear key, 5, 8, Enter.
