How to view the printer's IP address from the front display on ZXP1 and ZXP3

Article ID: 05957557



Topic or Information

This solution is useful for users that want to view the printer's IP address from the front panel

Applies To

ZXP Series 1 and ZXP Series 3 Zebra Card Printers


Ensure that the printer is turned off before following the steps below.

1. Push and hold the Multi-Function Control Button Located on the front of the printer.

2. While holding the Control Button, power on the printer using the Power Switch located on the backside of the unit.

3. Continue holding the button until the display shows "Printer Info".

4. Once the display shows "Printer Info", push the Control Button to scroll through the menu until you get to "IP:" Continue scrolling and you'll see the Subnet mask and Gateway.

Note: Aside from the network information, you can also view other information like the printer's serial number, Firmware Version, the printhead resistance, Printer Offsets and Ribbon Type.

Additional Information

Assigning IP address and Configuring Network Driver for ZXP1 and ZXP3  Read More>>