Link OS compatible printers do not support viewing external 10/100 print server settings from the LCD Display

Article ID: 63349802

Details


 

Topic or Information

Link OS compatible printers do not support the 1284.4 layer and thus does not allow the LCD Display to show the printer IP Address for the External (Parallel Port connected) 10/100 Print Server.

Applies To

ZT200 and ZT400 Series printers

External 10/100 ZebraNet Print Server

Details

The ZebraLink 1284.4 layer is no longer supported. The IP address of a ZebraLink print server connected to the parallel port will not be displayed on the printers front panel. Settings from a ZebraLink Print Server connected to the printers parallel port will not be communicated between the print server and printer.

Use the Test Button to print a Print Server configuration label Read More>>