Loading Firmware on a Kiosk Printer

Article ID: 63571984

Details


 

Topic or Information

Loading or updating firmware on a TTP Kiosk Printer

Applies To

TTP Model Kiosk Printers

Details

Firmware can be loaded via the Zebra Toolbox or via software command. The Kiosk Printer Toolbox Utility is available on the printer support page on the Zebra website. Select the Software Utilities Tab to access the downloadable file.

Via Toolbox, go to the Tools menu, upload file, and select "firmware" from the file type pull down at the top of the window. Make sure you select the correct firmware as some older firmware cannot detect if the firmware you are sending is the correct one for the printer. Then click add, add your firmware file and then click upload. 

For the software command, please see the Technical Manual. The Kiosk Printer Technical Manual is available on the printer support page on the Zebra website. Select the Manuals Tab to access the downloadable file.