LS1902 does not Automatically work with Synapse Smart Cables

Article ID: 46327174

Symptom

LS1902 does not auto sense Synapse Smart Cables.

Resolution

If the LS1902 does not automatically transmit data when using a Synapse Smart Cable scan the “Enable LS9100 Communication” bar code from the appropriate Synapse Smart Cable Guide.  This bar code initiates communication between the LS1902 and the Synapse Smart Cable.  A Synapse Smart Cable has a part number that starts STIxx-xxxx.
  1. Scan the “Set All Defaults” bar code from the LS1900 Series Product Reference Guide.
  2. Scan the “Set Synapse Default“ bar code from the appropriate Synapse Smart Cable Guide.
  3. Scan the “Enable LS9100 Communication” bar code from the appropriate Synapse Smart Cable Guide.
  4. Scan the host type bar code from the appropriate Synapse Smart Cable Guide