LS4004 Powered Up While in the Intellistand Causes No Decodes from Scanner

Article ID: 69998694

Symptom

When the LS400Xi is powered up while in the Intellistand, it behaves incorrectly. It does not decode bar codes until it is removed from the Intellistand and then placed back into the Intellistand.

Facts

LS400Xi

Root Cause

There is an initialization anomaly that randomly occurs within the scanner.

Resolution

Resolution
This issue is corrected in newer versions of the LS400Xi firmware.

Workaround
After powering the LS400Xi, remove it from the Intellistand and then place it back into the Intellistand.