LS9100-400 will not transmit data when connected to a host with the OPOS mode B host type

Article ID: 89486555

Symptom

LS9100-400 will not transmit data when connected to a host with the OPOS mode B host type

Root Cause

The LS9100-400 does not initially support the OPOS mode B host type.

Resolution

The LS9100-400 will not transmit data when connected to a host with the OPOS mode B host type.

The host selection can be changed to OPOS Mode B by scanning the OPOS Mode B bar code.  Click on the link in step 1 for a printable version of this document.  The printable version will include a list of Action Steps and Programming Bar Codes.

ADC-00013.doc See Document>>