MK11xx or MK20xx Hangs in Phase Two of Booting Up
Article ID: 58467770
When booting up the MK11xx or MK20xx, device gets to phase 2 and does not load the desktop.
This is caused by a failure while loading the mkconfig.reg file.
- During phase 2 of booting the device is loading all of the custom settings that are in the mkconfig.reg file. The mkconfig.reg file must be used to debug the components it is loading.
- When the MK device hangs during phase 2 of booting, you have to go back to the mkconfig.reg file and start eliminating each component that it is loading until you find which one or ones are not loading.