Possible solutions for OS message "System environment variable “PATH” is not set up correct"

Article ID: 35179390



Topic or Information

If you are running the ZebraDesigner software, make sure you are running the most current versions of the software and the ZebraDesigner driver downloadable from www.zebra.com. The version supplied on the CD may not be the most current available. This is also critical if you have upgraded to Windows 7 or 2008 Server.  Version 1 of the ZebraDesigner software and ZebraDesigner driver versions below 2.6.23 are not Windows 7 or Windows 2008 Server compatible.

Applies To

ZebraDesigner Drivers


Possible solutions include:

  1. Try rebooting the PC and restarting the installation.
  2. Try installing the driver using Start > Settings >Printers... > Add printer instead of using the installation utility under > Programs > Zebra Technologies > ZebraDesigner... > Add printer (this only applies to those who are using the ZebraDesigner software as well as the ZebraDesigner driver).
  3. It may be necessary to try a different PC.