Preventing transfer of material to the card magnetic stripe on a ZXP Series 8/9 Printer
Article ID: 46735127
Topic or Information
Preventing transfer of material to the card magnetic stripe
ZXP Series 8
There are a number of applications where it is undesirable to transfer the film to certain area of the card. As an example, anything deposited over a magnetic or signature stripe would be undesirable.
The retransfer process is accomplished by using an evenly heated roller to adhere the image to the card. To selectively exclude specific areas of the card from the transfer process a transfer inhibitor must be applied to the film.
Zebra provides two print ribbons with an Inhibit panel. The inhibit panels prevents transfer of the film to the card wherever it is applied on the film.
800012-942 Zebra i Series Color Ribbon for ZXP Series Printers, 5 Panel YMCKI, 500 images
800012-944 Zebra i Series Color Ribbon for ZXP Series Printers, 6 Panel YMCKKI, 415 images
See the following link for utilization of the inhibit panel. Read More>>
+ Product Codes
- ZXP Series 8 Card Printer
- ZXP Series 8 High Security Retransfer Card Printer
- ZXP Series 8 Secure Issuance Card Printer
- ZXP Series 9 Card Printer