Sending an Enter Key after Data in ScanWedge or DataWedge 2.x

Article ID: 60629483

Question

Why does data display on the screen, is appended to previous data or doesn’t move to the next line?

Facts

Pocket PC terminals with DataWedge 2.x or ScanWedge

Answer

Enter is not enabled by default.

EnableSend Enter Key after Suffix.
  1. Make sure that you have DataWedge 2.x or ScanWedge loaded on the device.
  2. Tap Start.
  3. Tap Today.
  4. At the bottom right of the screen, locate and tap once on the DataWedge/ScanWedge icon (looks like a bar code).
  5. From the menu that pops up select Config and then Setup.
  6. Put a check mark in the box marked “Send enter key after suffix” and click OK.