Setting a Label Length Greater than 39 Inches for Continuous Media in ZebraDesigner Driver

Article ID: 45228803

Details


 

Topic or Information

Within the ZebraDesigner driver there is a limitation that prevents setting a label length value higher than 39 inches for media with gaps, media with mark, or continuous media.

Applies To

Setting label length within ZDesigner Driver

Details

The ZebraDesigner driver has been configured to use the lowest denominator for each media type, which is 39 inches. If a label length value of greater than 39 inches for continuous media is a requirement of your application, contact your reseller to request a custom version of the ZebraDesigner driver.

If a value for Height (Label Length) is entered that exceeds 39.8 inches when the driver is set for Continuous, the value will automatically change to 39.80.

User-added image